How to Calculate Your Due Date (Two Ways, and Why It Is a Window)
Updated: 2026-11-02
A due date is a single point on a calendar, but in reality it is the centre of a window. The standard way to estimate it is arithmetic, not guessing: count a fixed number of days from an anchor you actually know — the first day of your last period, or a conception date. This guide explains both methods the calculator on this page runs, shows the exact formulas with a worked example, covers conception, ovulation and IVF-based dating, and is clear about how reliable the number really is.
The short answer
From your last period: due date = last period + 280 days (40 weeks), adjusted by your cycle length. That is Naegele's rule. From a conception date: due date = conception + 266 days (38 weeks). Both describe the same pregnancy from different starting lines.
The calculator does this arithmetic on plain UTC day counts, so time zones and daylight saving never skew the result. Type an anchor date, set your cycle length if needed, and it also shows your gestational age, trimester and a countdown to the estimate.
- LMP method: EDD = last period + 280 + (cycle length − 28) days
- Conception method: EDD = conception date + 266 days
- Example: last period 1 Jan, 28-day cycle → due date 10 Nov
- Treat the date as the centre of a 37–42 week window
Why 40 weeks from a period, when the baby is ~38 weeks old
Gestational age is counted from the first day of the last period, not from conception. Ovulation usually happens about 14 days into a cycle, so by the time the egg is fertilised you are already roughly two weeks 'pregnant' in gestational terms. Forty weeks from the last period is about 38 weeks from conception — both describe the same pregnancy, just from different starting lines.
The reason for anchoring on the period is practical: it is a date you actually know, usually more reliably than the exact moment of ovulation. Naegele's rule builds that fortnight in deliberately, which is why the math looks odd at first.
The two methods the calculator offers
The last-period (LMP) method is the default and the one most often used, because the first day of your last period is the anchor you are most likely to know. The conception method is cleaner when you actually know the date — from tracking, a precise ovulation test, or a fertility procedure — because the moment of ovulation is already the fact you measured.
Method 1: from your last period (Naegele's rule)
Add 280 days to the first day of your last period. For a textbook 28-day cycle that is the whole rule. If your cycles average a different length, the due date shifts by your cycle length minus 28: a 30-day cycle ovulates around day 16, two days later, so the date moves +2 days; a 24-day cycle moves it four days earlier.
The formula is EDD = LMP + 280 + (cycle − 28). The calculator has a slider from 21 to 35 days so you can set your real average and see the date move.
Method 2: from the conception date
When you know the conception date, the arithmetic is simpler: due date = conception + 266 days (38 weeks). No cycle adjustment is needed, because the moment of ovulation is the anchor itself.
The calculator also works the other direction and shows the estimated conception date and your current gestational age, so you can see the whole picture at once.
A worked example
Last period on 1 January, 28-day cycle. Naegele's rule adds 280 days: 1 January + 280 days lands on 10 November. That is the estimated due date, and it is the centre of a 37–42 week window, not a delivery appointment.
If your cycles average 30 days instead, the adjustment is +2, so the estimate moves to 12 November. If you instead know you conceived on 15 January, then 15 January + 266 days gives the same window from the conception side.
Conception, ovulation and IVF-based dating
Some people ask how to calculate the due date from ovulation or from a fertility procedure. The honest answer is that ovulation-based dating is just the LMP method with a better anchor: if you know the ovulation date, add 266 days to it. For IVF and fertility medication, your clinic uses its own dating based on the exact transfer and the embryo's age, so the calculator's general rule is a rough guide, not a substitute for the number your clinic gives you.
The calculator covers the two standard anchors you can work out yourself. Anything more specific — a transfer date, an embryo age, an early scan — belongs with your provider.
Gestational age, trimesters and the countdown
The calculator also shows how far along you are: gestational age in weeks and days from your anchor, the trimester you are in (first through 13, second through 27, third from 28), and a live countdown to the estimated due date.
These are the same numbers your provider quotes at appointments, computed from the same anchor. If your clinic has set a different date after an early ultrasound, that one takes priority — see the accuracy note below.
How accurate is an estimated due date
As a single date, not very: only about one in 20 babies arrives on their exact due date, and most arrive within the 37–42 week term window. As a window it is reliable — an LMP-based estimate is typically within one to two weeks.
An early ultrasound, often around 8–13 weeks, refines it further by measuring the baby directly, and that is usually the date your provider locks in. If your cycles are genuinely irregular, an early ultrasound is the most reliable way to date the pregnancy.
One practical habit is to keep both the LMP-based date and the ultrasound date side by side. If they land within a week or two of each other, there is nothing to do. If they are further apart, the scan date usually wins, but it is worth asking your provider which one they are using so you are reading the same clock at every appointment.
What this calculator does not do
This is arithmetic based on standard dating rules — Naegele's rule and its cycle-length adjustment — nothing more. It is not medical advice. Treat the output as an estimate and confirm it with a healthcare provider.
It does not interpret scans, does not model twins (who are often dated differently), and does not replace your clinic's dating after IVF or fertility medication. If anything feels wrong, contact your provider, not this page.
- An estimate, not a diagnosis or medical advice.
- No ultrasound interpretation — early scans refine the date.
- Not tailored to IVF, twins or fertility medication; ask your clinic.
- Dates are never stored or uploaded; everything runs in your browser.
Frequently asked questions
How do I calculate my due date from my last period?
Use Naegele's rule: add 280 days to the first day of your last period. If your cycles are not 28 days, add (your cycle length − 28) on top. The calculator does this with a cycle slider and also shows your gestational age, trimester and a countdown.
How do I calculate the due date from the conception date?
Add 266 days (38 weeks) to the conception date. Because the moment of conception is the anchor, no cycle-length adjustment is needed. The calculator's conception mode does exactly this and also shows the equivalent last-period date.
Why 40 weeks if the baby is really around 38 weeks?
Because gestational age is counted from the first day of the last period, not from conception. In a 28-day cycle ovulation falls around day 14, so by fertilisation you are already about two weeks along in gestational terms. 40 weeks from the period and 38 weeks from conception are the same pregnancy from two starting lines.
Can I calculate the due date from ovulation or IVF?
From a known ovulation date, add 266 days. For IVF and fertility medication, your clinic uses its own dating based on the exact transfer and embryo age, so the calculator is only a rough guide there — ask your provider for the official number.
How accurate is a calculated due date?
As a single date, not very: about one in 20 babies arrives on the exact day, and most arrive within the 37–42 week window. As a window it is usually within one to two weeks, and an early ultrasound (often 8–13 weeks) narrows it further.
My cycles are irregular — does this still work?
It gives a reasonable estimate, but the math assumes a regular cycle. Set the cycle slider to your real average, or use the conception mode if you know the date. With genuinely irregular cycles, an early ultrasound is the most reliable way to date the pregnancy — ask your provider.
Is this medical advice?
No. It is arithmetic based on standard dating rules (Naegele's rule and its cycle-length adjustment), nothing more. Treat the output as an estimate and confirm it with a healthcare provider — especially after IVF or fertility medication, where your clinic uses its own dating.
Are my dates stored or uploaded?
No. The calculation runs entirely in your browser on UTC day counts, so time zones and daylight saving never skew it. The dates you enter are never transmitted, stored or logged; they exist only on your device while you use the page and disappear when you close it.